2
INSTALLATION AND OPERATION INSTRUCTIONS
INTRODUCTION
Thank you for purchasing your American Fibertek MR-220C-SL singlemode two channel video
receiver. Please take a few minutes to read these installation instructions in order to obtain the
maximum performance from this product.
FUNCTIONAL DESCRIPTION
The MR-220C-SL operates as half of a transmitter / receiver pair for the transmission of two
simultaneous, real time, baseband NTSC, PAL, RS170, or RS343 video signals. The MR-220C-
SL is designed to operate with the MT-220C-SL or RT-220C-SL video transmitter over one
singlemode fiber optic cable.
The MR-220C-SL receiver converts a single optical input into a maximum of two video outputs.
The 220C-SL Series product is designed to operate over an optical loss budget range of 0 to 12
dB. The MR-220C-SL operates on 9 um singlemode fiber. Refer to the data sheets for detailed
performance specifications.
This unit is contained in a compact and rugged extruded aluminum housing with internal dc
voltage regulation. The detachable terminal block and LED indicators provide for easy
installation and monitoring of video and power.
The MR-220C-SL is designed for mounting as a modular stand alone unit. For a rack mounted
version please see the RR-220C-SL.
INSTALLATION
THIS INSTALLATION SHOULD BE MADE BY A QUALIFIED SERVICE PERSON AND
SHOULD CONFORM TO THE NATIONAL ELECTRICAL CODE, ANSI/NFPA 70 AND LOCAL
CODES.
Mount the unit to a secure surface using #8 (3mm) hardware in four places. See the drawing on
the next page for mounting dimensions. Be sure to allow sufficient room for the required
minimum bend radius of the fiber cable used.
