T
ROUBLESHOOTING
A problem may not necessarily be caused by the product. You can save time and money if you
rectify some simple problems yourself. The following section is designed to help you troubleshoot
your vest.
S
YMPTOM
C
AUSE
R
EMEDY
"OFF" LED light does not flash when
vest is ready for operation.
Plug connection of the connection cable and
the power supply unit/battery is not connected
Power plug of power supply unit is not plugged
into socket or battery is not charged/connected
The integrated fuse tripped due to a fault in the
electronic control.
Power supply/unit battery defective
Power supply fuse defective or automatic
circuit breaker tripped
Power Failure
Standby Mode
- Plug in correctly
- Plug in power plug
and/or Plug in/charge battery
- Needs to be repaired by an IBC
authorized electrician or service
dealer
- See above
- Change power supply fuse or
reset automatic circuit breaker
---
- Press any button on the hand-
held controller
The selected program function has
suddenly switched off
The program time set on the timer has elapsed
Battery discharged
- Restart
- Charge battery or switch to
mains mode
Functions can't be set or are not
indicated by the corresponding LED
light
Fault in the electronic control
- Needs to be repaired by an IBC
authorized electrician or service
dealer
Vibration units inoperative
Motor blocked
- Needs to be repaired by an IBC
authorized electrician or service
dealer
Summary of Contents for RP8001
Page 1: ......
