![background image](http://html.mh-extra.com/html/afe-power/takeda-56-70043d/takeda-56-70043d_instruction-manual_2864101007.webp)
Page 7
Refer to Figure D for Step 10-11
Step 10: Locate the mounting grommet 9 . Remove the grommet by pushing out the steel insert and
removing the rubber grommet from the airbox. Set aside the steel insert and bushing for later use.
Step 11: From the inside of the airbox using a 10mm nut driver, remove the nut 10 holding on the
mounting bushing to the airbox. Set aside the mounting bushing and bolts for later use.
*NOTE: Make sure to pay attention to the orientation of the tabs on the mounting bushing. This will be
needed for step 13. (Tab facing you should be at the 3 o’clock position)
9
REMOVAL
Figure D
10
\