![background image](http://html.mh-extra.com/html/afe-power/takeda-56-70005d/takeda-56-70005d_instruction-manual_2864100007.webp)
Refer to Figure D for Steps 7-9
Step 7: Remove the two plastic rivets connecting the factory air inlet to the front of the car. Use a
flat-head screwdriver to press down on the center of the rivet to unlock, and then pull them out.
These plastic rivets will be replaced.
Step 8: With a 10mm socket, extension and ratchet, loosen the three bolts securing the factory
housing to the vehicle. These three bolts will be re-used during the installation of the Takeda
air intake system.
Step 9: Remove the bottom of the factory housing and air inlet as one piece out of the vehicle.
Figure D
aFepower.com
Page 7
REMOVAL