![background image](http://html.mh-extra.com/html/afe-power/scorcher-gt-77-47004/scorcher-gt-77-47004_instruction-manual_2864092007.webp)
Refer to Figure D for Steps 5-6.
Step 5: Locate then disconnect the MAP sensor connector by pressing down on the locking tab of the
connector and sliding it out of the sensor.
Step 6: Locate the MAP sensor jumper harness on the aFe module. The harness will be labeled "MAP".
Plug the female connector of the module into the factory MAP sensor, then the male connector
of the module to the female connector of the engine harness.
Page?
aFepower.com