aFe Power 46-70162, Instruction Manual, Page: 4 / 16

4
1.
Park your Jeep on level ground and apply the parking brake.
2. Position a drain pan under the differential cover.
3. Rear Axle Only: Using a panel popper, remove the electric locker wire loom (if
applicable).
4. Using a ½” socket and rachet, remove all but one of the top bolts from the
differential cover. Leave the bolt at the top. Loosen but do not remove.
5. Using a gasket scraper, start at the bottom of the cover and carefully (so as
not to gouge the housing metal) insert and pry off old cover. Allow the old
gear lube to drain. Remove differential cover.