633 Fogger
Project medium to small fog
particles up to 12 feet.
COMPRESSED AIR
FLOW IN CFM
MODEL
60 PSI
80 PSI
1-WAY
3.0
3.7
CHEMICAL SOLUTION
DRAW RATE
Average ounces of chemical solution per
minute the fogger will draw
13.3
13.7
Metering Tip Selection Chart
Metering
Tip Color
Oz. per
Min.
Brown
.56
Clear
.88
Bright Purple
1.38
White
2.15
Pink
2.93
Corn Yellow
3.84
Dark Green
4.88
Orange
5.77
Gray
6.01
Light Green
7.01
The Oz. per Minute shown are
approximate. Due to chemical
viscosity, actual Oz. per Minute may
vary.
AF 950001-B • 633 Compact Fogger
Safety & Operational Precautions
Manufacturer assumes no liability for the use or misuse of this unit.
Wear proper respiratory protection, protective clothing, gloves and eye-
wear when working with chemicals.
Always direct the discharge away from electrical devices.
Follow the chemical manufacturer’s safe handling instructions.
NEVER fog flammable materials through the fogger.
SPECIAL CAUTION: This fogger atomizes chemical into the air.
Ensure that the area to be fogged has been evacuated of all
people without proper respiratory protection!
TO INSTALL
(REFER TO DIAGRAM, NEXT PAGE.)
TO OPERATE
SPECIAL CAUTION: This fogger atomizes chemical into the air. Ensure
that the chemical is safe to be around or the area to be fogged has
been evacuated of all people and/or animals before starting fogging.
Upon completion of fogging, ensure that sufficient time has elapsed
for all the fog to have dissipated before returning to the area. Wear
proper respiratory protection, protective clothing, gloves and eye-
wear when working with chemicals
1. Unscrew the bottle, add ready to use chemical bottle and re-attach.
2. Don't over tighten.
3. Connect the trigger gun to a compressed airline.
4. Direct the discharge in a safe direction. Pull the trigger to begin
application.
5. When application is complete, release the trigger.
6. The fogger may produce more fog volume than needed.
7. If fog is too dense, metering tips are included for restricting the solution
volume to produce a lighter fog.
8. Make final metering tip adjustments based on application results. Try the
next larger sized metering tip until the results are acceptable.
- Page 2 -