Afag SREH-50-IOL, Assembly And Operating Instructions Manual

Page: 11 / 52

Safety instructions
Assembly instructions EN

SREH-50-IOL

Date 17.06.2022

Version 1.0 11–52
2.6 Personal protective equipment (PPE)
The personal protective equipment serves to protect the personnel from hazards
affecting their safety and health at work.
When working on/with the smart rotary module, the personnel must wear the
personal protective equipment assigned by the safety officer of the operating
company or as required by safety regulations. In addition, the personnel is
required to:

Wear the personal protective equipment provided by the operating company
(employer),

check the personal protective equipment for proper condition, and

immediately notify the person responsible on site of any defects found on the
personal protective equipment.
Personal protective equipment and the respective mandatory signs:
Protective clothing
is a close-fitting clothing specifically
designed to protect personnel from hazards during work.
Protective gloves are specifically designed to protect the
personnel against hand injuries (such as cuts, abrasion,
burns).
Safety shoes are specifically designed to protect the
personnel against foot injuries from crushing, falling objects or
slipping on slippery surfaces.
Hearing protectors are required to protect the personnel
against excessive noise levels to prevent noise-induced
hearing loss.
2.7 Changes and modifications
No changes may be made to the module which have not been described in
these assembly instructions or approved in writing by Afag Automation AG.
Afag Automation AG accepts no liability for unauthorised changes or improper
assembly, installation, commissioning, maintenance or repair work.
The module may not be changed or modified in any way, except with the prior
written consent of Afag Automation AG.