Page 12
12/02/2020
R05.1
3.4
Power supply
WARNING
▪
Any work on the electrical supply may only be performed
by trained, authorised, qualified personnel.
▪
The power supply must be protected by an FI switch (pro-
vided by the customer).
▪
The helical conveyor may only be operated with the power
supply specified on the name plate.
The IRG1-S device can be used to activate the linear feeder. The MSG801 or MSG802
can also be used. Please note that an additional CEE connector plug is required for the
MSG controllers (Order number: 11006982)
Installation of the plug is only to be carried out by technically qualified personnel accord-
ing Figure 5.
Figure 5:
End of the wire for additional plug
