R02.1
04/03/2020
Page 5
1.2
Basic safety information
This description contains the necessary information for the correct application of the
product described below. It is intended for use by technically qualified personnel.
Qualified personnel are persons who, because of their training, experience and posi-
tion as well as their knowledge of appropriate standards, regulations, health and
safety requirements and working conditions, are authorised to be responsible for the
safety of the equipment, at all times, whilst carrying out their normal duties and are
therefore aware of, and can report, possible hazards (Definition of qualified employ-
ees according to IEC 364).
DANGER
Hazardous Voltage! Failure to observe can kill, cause serious in-
jury or damage.
•
Isolate from mains before installation or dismantling work, as well as for fuse
changes or post installation modifications.
•
Observe the prescribed accident prevention and safety rules for the specific
application.
•
Before putting into operation check if the rated voltage for the unit conforms
with the local supply voltage.
•
Emergency stop devices must be provided for all applications. Operation of
the emergency stop must inhibit any further uncontrolled operation.
•
Electrical connections must be covered.
•
The earth connection must be checked for correct function, after installation.
1.3
Specified use
The units described herein are electrical controllers for installation in industrial plants.
They are designed for power adjustment on vibratory feed equipment.
NOTE
Any other use is inappropriate and will result in the warranty be-
coming null and void.
See also our General Terms of Business.