5
Lay Sink (B-1) upside-down.
Insert Legs (B-5) into Leg
Collars (B-3).
CAUTION:
Shut off water supply prior to installation.
Tighten screws on each Leg Collar
with Allen Wrench (T-2).
Connect Connection pipe (B-7)
with 3 Way L Shape Connectors (B-9),
and put into the pre-installed legs.
Insert the Connection pipes (B-8)
into 3 way L shape connector (B-9).
Put the 2 way connector (B-10)
into the legs and connect to the
Connection pipe. Tighten the screw
with Allen Wrench (T-3).
Adjust the 3 way L shape connector
(B-9) on the legs and tighten the
screw with Allen Wrench (T-3).
B-9
B-7
B-5
B-3
2
3
1
B-3
B-5
T-2
B-9
T-3
6
B-8
B-10
4
5
Optional: Apply a 1/4” bead of
Plumber's putty 1/4” (7 mm) around
the entire
sink drain hole as shown
above.
