14
IRMT-4 Aeware instructions
checking codes
2• Press and hold
setup
until
LED blinks twice, then
release key.
3• Enter
9-9-0
. LED will blink
twice. Remember to press
and hold
shift
key first to
access numbers (
0-9
).
4• To view the code for the
first digit, press
1
once. Then
count the LED blinks (e.g., 3
blinks = 3) and write down
the number.
1• On the IRMT-4 Aeware,
press mode key once (
tv
,
vcr
,
CD
or
SPA
).
If you have set up the IRMT-4 Aeware using the “Searching For Your Code” procedure,
you may need to find out which four-digit code is operating your equipment.
Simply substitute the appropriate mode key (i.e.,
tv
,
vcr
,
CD
or
SPA
) for the device you are checking
and repeat steps 1-5.
