AEV Energia, Manual

Page: 25 / 44

P
AG
. 30
Energia Energia
Energia Energia Energia
Electronic Equipment
E
le
c
tr
o
n
ic
E
q
u
ip
m
e
n
t
E
le
c
tr
o
n
ic
E
q
u
ip
m
e
n
t
A
E
V
S
.
P
.A
V
I
A
D
E
L
L
A
T
E
C
N
I
C
A
N
.3
I
-
4
0
0
5
0
A
R
G
E
L
A
T
O
B
O
L
O
G
N
A
I
T
A
L
Y
W
W
W
.
A
E
V
.
N
E
T
W
W
W
.
A
E
V
-
U
S
A
.
C
O
M
E
-
M
A
I
L
:
I
N
F
O
@
A
E
V
.
N
E
T
How t o use t he Talk Back
There are two kind of talk backs
TB from Control Room (director) to Control Studio (DJ) or TELCO
TB from Control Studio (DJ) to Control Room (director)
Talk Back from Control Room (Regia)
The TB from Control Room (direction) can be sent to Control Studio (DJ), TELCO 1, TELCO 2, UTL
and eventually TELCO 3 and 4.
The selection of the TB signal's destination is done in the CUE CONFIGURATION menu.
The talk back button is next to the "MAIN" button and it is not necessary to use an external
microphone because there is a pre-amplified microphone that is embedded inside the console.
If TB is received from Control Room, the signal of the internal microphone will be sent to the
enabled buses and it will replace the audio previously selectioned.
The same TB signal from Control Room will enable the Mute of the Control Room's output to avoid
Laarsen effects.
If TB to Control Studio and TB to TELCO 1 are simultaneously enabled the following control is
carried out: if TELCO 1 is in the start or stop position but the CUE is off, then the TB signal is
sent to Control Studio.
If TELCO 1 is in the stop position and CUE is ON the TB signal will be sent to TELCO 1 and no more
to Control Studio.
This is to avoid that the DJ is annoyed during the private communication and viceversa.
Talk Back from Control Studio (DJ)
The TB from Control Studio (DJ) is sent to Control Room (direction) and to the Bus Telco if the
telephone is in STOP with active CUE (condition of private communication with the telephones).
The talk back button must be connected to the "Remote/Fader" input.
If TB is received from Control Studio, the signal of the microphone defined as "M.SPCH" (Main
Speach will be sent to Control Romm replacing the previously selectioned audio.
The same TB signal from Control Studio will enable the Mute of the changeable output of Control
Studio to avoid Laarsen effects.