AETNAGROUP ROBOPAC ECOPLAT, Use And Maintenance Manual

Page: 34 / 41

21.3.6. W
EIGHT IS RECEIVED FROM SERIAL
PESO SR
PESO SR PESO SR
PESO SR
is displayed, that is, the instrument receives weight from another SD in-
strument, rather than from a load cell
goes to the next selection
with the enter key, the datum is accepted and the operation is finished.
2 1 . 3 . 6 . 1 .
T r a n s m i s s i o n p r o t o c o l
Protoc
Protoc Protoc
Protoc
is displayed for a few seconds
Selects the type of protocol.
selects the parameter and continues
rs232 (Standard), Rx ScF (Radio), Rx din (dynamometer) is displayed
Press Zero to toggle
Confirms the selection and continues
Use the numeric setting method (section 2.1 ).
MEMOr is displayed (2 sec), then it returns to weighing.
21.3.7. C
OMMUNICATION STRINGS UPON REQUEST
characteristics of a string sent from the PC
STX [No. channel] [command] [datum] CHK ETX
STX = (CHR$(2)) beginning of transmission
[No. channel] = 1 number cha 80H
[command] = 2/3 command characters
[datum] = 6 datum characters
CHK = 2 check-sum XOR characters [No. channel] [com-
mand] [datum]
ETX = (CHR$(3)) end of transmission
characteristics of SD response strings to READ commands
STX [No. channel] [command] [datum] CHK ETX
[command] = 1/2 command characters
OK SD response string to WRITE commands
STX
[No. c]
(CHR$(6)) ETX
PESO SR PESO SR PESO SR PESO SR
MEMOr
MEMOr MEMOr
MEMOr
CAn CAn CAn CAnAAAALE LE LE LE
Pr
Pr Pr
Prooootoc
toc toc
toc
StAnd StAnd StAnd StAnd
34/41