COMPACTA 400 - 620 - 960 M
13
3710305395
2
TECHNICAL INFORMATION
2.1
MACHINE GENERAL DESCRIPTION
The above mentioned machine is a stretch
fi
lm banding machine intended to spiral wrap products of
varying size and shape.
Readily available reel of stretch
fi
lm are used for wrapping.
Wrapping is performed by combining stretch
fi
lm reel rotation with the horizontal movement of the pro-
duct.
The operator must place the product on the machine and start the cycle using the pedal control, subse-
quent wrapping, length wrapping,
fi
lm fastening and cutting operations are automatic.
Such wrapping can occur in the positions chosen by the operator and with pre-selected number of wraps
or on all the length of the product and without limitation on the number of wraps if the operator moves
the product along the roller conveyors.
The machine is equipped with a series of safety devices designed to avoid any harm befalling the operator
or other persons who come into contact with the machine in any way.
A. Base
:
the main structure of the machine.
B. Control panel:
to activate machine functions.
C. Infeed and outfeed roller surface conveyor
unit:
they hold the product to be wrapped and tran-
sport it to operations; they are equipped with
width-adjustable roller guides.
D. Rotating ring unit:
made up of a rotating ring with a transmission
belt, driven by an electric motor guided by an
inverter.
E. Reel-Carriage unit:
made up of a quick load support reel carriage
and a return roller that controls
fi
lm tension.
F. Clamping and cutting unit:
to clamp and cut the
fi
lm tail.
G. Pressure platen unit (optional):
they hold product against the roller surfaces.
Positioning is manual.
07080301
G
B
E
G
D
A
F
C
Danger - Attention
This machine is normally installed in workshops or industrial environments protected from the
atmospheric agents.
Use of this machine in explosive environments or when exposed to the elements is strictly for-
bidden.
During the operating stages just one operator is necessary to perform the infeed, cycle start and wrapped
product outfeed operations.
2.2
ACCESSORIES (OPTIONAL)
- Manual adjustment infeed and outfeed pressure platen unit
- Reel carriage with 50 mm internal diameter
- Dual lateral infeed and outfeed guide
- Lateral roller guides
