- 1 -
1.
Introduction
ACE-N622 is a standard Nano-ITX form factor carrier board. Support for NVIDIA® Jetson™
TX2 and Jetson™ TX1. You can quickly emulate the functionality of your desired end
product for software development and hardware verification.
To build a functional prototype of your target system you will need:
•
Nvidia TX1/TX2/TX2i module
(Aetina’s P/N: NSO-MD-TX1/NSO-MD-TX2/NSO-MD-TX2i)
•
Nano-ITX carrier board (Aetina’s P/N: ACE-N622)
•
Power adaptor 12-19 DC/5A
1.1
Features
•
Specifically designed for high performance and low-power envelope AI computing
Additional driver to support Embedded peripheral modules for multiple I/O
expansion capability
•
On-board 1x HDMI, 2x CAN Bus, 4x GPIO, 1x RS232, 1xI2C and 2x Full-Mini Cards to
support rich multimedia and MIPI CSI camera
•
Extended temperature range -20°C to 70°C
•
Suitable for general robotics, UAV, industrial inspection, medical imaging and deep
learning
•
12V / 5V output to support mPCIe extension module.
1.2
Board
•
6-layer printed circuit board(PCB)
•
Phsical dimensions: 120mm x 120mm
•
High-Bandwidth Digital Content Protection (HDCP) support
