Step 3: Installation of the Handset (optional)
Step 4. Cable connection
Step 5. Keyboard
Step 6. First time equipment is switched on
1:
Disconnect the HANDSET cable
from the BASE C.
2
Dismantle the HANDSET SUPPORT and
the FIXING BRACKET.
3
Plug the HEADSET connector cable
in the BASE C.
4
Activate use of the headset via the Audio Out
settings.Refer to the section “Audio-Video-Data”
in this manual.
:
:
:
For opening or closing the last calls list.
For opening or closing the phonebook.
For reducing the current value of certain parameters
(volume, digital zoom).
For increasing the current value of certain parameters
(volume, digital zoom).
For viewing the local video camera image.
For disabling the micro-telephone and activating
the handsfree function.
For viewing your own image on the display.
For suppressing audio transmission during a connection.
To enable or disable the sending of video of yourself.
For selecting from different choices in menus.
For selecting from different choices in menus.
For selecting from different choices in menus.
For selecting from different choices in menus.
For selecting from different choices in menus.
For entering or exiting the main configuration
and management menu.
For confirming the last selection.
For opening the Help menu.
For closing the Help menu.
When the equipment is switched on for the first time,
the following menu will appear:
1 To select the desired language.
2 To control and to fill up the other edit box.
3 To select icon “menu” and save the setup.
1
0
LAN
LAN
Local Area Network
Ethernet connection
S
S
a/b1
/ 2
a b
To S bus
NT1
