1. Install the PoE switch in a ventilated and dry place that is free of electromagnetic source, vibration, moisture, and dust.
2. Make sure the ventilation openings on the switch are not blocked.
3. Use fiber optic cables nd transceiver compliant with the following: Multi-mode: 50/125um, 62.5/25um, 850nm;
Single-mode : 9/125um ,1310nm.
4. DC input. Follow the printed polarity for V+, V-, and Ground.
1. Pull out the 2-pin terminal block.
2. Connect power wires to V+ and V-, Use a flatlade screwdriver to secure the wire-clamp screws.
3. Connect SFP ransceiver to the fiber port.
4. install the 2-pin terminal block, and check power LED.
5. The switch must be grounded properly by using a ground wire to connect switch ground screw to earth ground,
otherwise, the surge protection level will be greatly reduced.
IMPORTANT
:
* 1x PoE switch
* 1x Quick Installation Guide
* 2x 2pin terminal block
* 1x DIN rail bracket
PACKAGE CONTENTS
Quick Installation Guide
Industrial GbE PoE Switch
P/N: A625012700G
Model
Description
H30-042-30 4xGbE 30W PoE + 1xGbE RJ45 + 1xGbE SFP
H30-044-30 4xGbE 30W PoE + 2xGbE RJ45 + 2xGbE SFP
H30-044-90 4xGbE 95W PoH PoE + 2xGbE RJ45 + 2xGbE
SFP
H30-044-91 4xGbE 90W bt PoE + 2xGbE RJ45 + 2xGbE
SFP
H30-082-30 8xGbE 30W PoE + 2xGbE SFP
Model
Description
H32-042-30 4xGbE 30W PoE + 1xGbE (24VDC/56VDC) PoE
+ 1xGbE SFP
H36-042-30 4xGbE 30W PoE + 1xGbE RJ45 + 1xGbE SFP
H36-044-90 4xGbE 95W PoH PoE +2xGbE RJ45 + 2xGbE
SFP
H36-044-91 4xGbE 90W bt PoE +2xGbE RJ45 + 2xGbE SFP
H36-082-30 8xGbE 30W PoE + 2xGbE SFP
CONNECTION
LED
Color
State
Description
Power
Amber
ON
The switch is powered on correctly.
Off
Not receiving power from power 1 or power 2.
PoE Link
Amber
ON
PD is detected on the designated port.
Off
No PD is detected.
Data Link
Green
ON
Tx link is detected.
Off
Link is not detected.
Flashing
Data is being transmitted or received.
SFP Link
Green
ON
Fiber link is detected.
Off
Fiber link is not detected.
Flashing
Data is being transmitted or received.
LED
Color
State
Description
Power
Amber
ON
The switch is powered on correctly.
Off
Not receiving power from power 1 or power 2.
24VDC
56VDC
Green
Amber
ON
The No.5 port output is 24VDC PoE
ON
The No.5 port output is 56VDC PoE
Off
The No.5 port is no PoE ouput
PoE Link
Amber
ON
PD is detected on the designated port.
Off
No PD is detected.
Data Link
Green
ON
Tx link is detected.
Off
Link is not detected.
Flashing
Data is being transmitted or received.
SFP Link
Green
ON
Fiber link is detected.
Off
Fiber link is not detected.
Flashing
Data is being transmitted or received.
H30 / H36 Series
H32-042-30
Power LEDs
All Specifications are subject to change without noice.
RESET
Reset the switch
3 seconds
Blinking Green
All LEDs off
