AC on/off switch
GbE Combo
RJ45/SFP ports
FE RJ45
PoE ports
DC input
LEDs
100~240VAC power input
1. Install the PoE switch in a ventilated and dry place that is free of electromagnetic source, vibration, moisture, and dust.
2. Make sure the ventilation openings on the switch are not blocked.
3. Use CAT5 or 5e UTP/STP cables.
4. AC input (100~240V/AC, 50~60Hz)
5.
IP67 rated housing
6.
Although housing is IP67 rating , this is not suitable for water jets.
IMPORTANT
:
INTRODUCTION
CONNECTION
* 1x PoE switch
* 1x Quick Installation Guide
* 1x T25 L-wrench
PACKAGE CONTENTS
H21-082-31-150
Quick Installation Guide
The H21-082-31-150 is an 8 port 10/100BaseT PoE switch capable of feeding 15.4/30W (54V max. per port) power to
Power over Ethernet (PoE) devices. It comes with another 2x GbE combo ports.
Outdoor Unmanaged PoE Switch
P/N: A625015400G
EXTENSIVE MODE DIP SWITCH
EX Mode OFF: normal communication between port 1~6.
EX Mode ON : 1-4 port can be isolated each other but 1-4 port can connect to 5~ 6 port after enable EX Mode to stop
broadcast storm to increase forwarding rate of frame. The EX mode(Port 1 & 2), Up to 250m PoE distance allows you to
expand you network via Ethernet cable to where there is no power line or outlet but where you want to fix device such as
IP Camera.
• EX mode reaches 802.3af(12.95W) camera up to 250m@10Mbps via EXPoE ports
• EX mode reaches 802.3at(24W) camera up to 200m@10Mbps via EXPoE ports
Restart the switch after changing the Extensive mode.
*Effect factors
1.Must connect af PoE PD.
2.Poor cabling quality with insufficient copper.
3.IP camera’s networking design could not support 10Mbps@250m transmission.
**Suggestion
1.Checking the interoperability reaching 10Mbps@250m before physical deployment.
2.Adjust to “EX Mode OFF” reaching 10/100Mbps@100m if “EX Mode ON” is fail.
