Quick Installation Guide
P/N: 5019032602
C42-050-30-A bt Ceiling PoE Switch
C42-050-30-B bt Ceiling PoE Switch
C42-050-30-A
C42-050-30-B
CONNECTION
C42-050-30-A / C42-050-30-B
Installation Steps
C42-050-30-A / C42-050-30-B
Application
* 1x PoE switch
* 1x Quick Installation Guide
PACKAGE CONTENTS
C42-044-91-380
90W bt PoE Switch
C42-050-30-B
C42-050-30-A
PoE (Data + Power)
Wifi AP
Camera
Network
Speaker
Sensor
Wifi AP
Camera
Network
Speaker
Sensor
Installed on the system ceiling
1. Attach the ceiling mount bracket to plasterboard, etc.
● It is recommended to add the fastening screw to the hole size of the ceiling, turn it with a screwdriver to install it.
The ceiling thickness that can be connected with the clamping bracket is from 5 to 45 mm.
● The recommended screw torque is 7kgf-cm
±
3.
● Install on the ceiling with sufficient strength.
● If you have to install it on rock wool ceiling and other weak ceiling panels, please provide enough reinforcement.
● The recommended ceiling opening size is φ150mm.
● The recommended minimum space (height) for ceiling switch installation is 140mm (For Installation and CAT5/6 cable routing.)
LAN LED
PWR LED
PD Port
PoE LED
Reset
12V LED
24V LED
LAN LED
PWR LED
PD Port
PoE LED
Reset
LED DEFINITIONS
Power
Amber ON
The Power LED lights up when the switch is connected to a power source.
12V (C42-050-30-B only)
24V (C42-050-30-B only)
Amber ON
Have output 12VDC power.
Amber ON
Have output 24VDC power.
LAN
PoE
Green ON
Port is enabled and link established.
Grren Blinking
Port is transmitting and receiving data.
Amber ON
Indicates the PoE powered device (PD) is connected and the port supplies power successfully.
Amber Off
Indicates no powered device (PD) connected.
24VDC Output
at PoE Output
bt PoE Output
GND
bt PoE Input
12VDC Output
at PoE Output
bt PoE Output
GND
bt PoE Input
