LEDs
RJ45
Yellow ON
PoE: Power port is connected to PD
Green flash
LAN: Data is being transmitted or received.
OFF
No connection
PWR
Yellow ON
Power adapter is connected the EPo2 module
LINK
Green ON
Rx and Tx EPo2 module is connected.
DIP Switch
RACKMOUNT INSTALLATION
DIP#
On
Delivery PoE output to PD device
Off
No PoE output to PD device
NOTE:The PoE On/Off switch is only available on 2E10-110-TX
Distance/Power Chart
NOTE:
1. The length of network cable for camera connection is 1m CAT5e cable.
2. The power delivery will vary on the quality of 2 wires cable due to resistance.
CH-100-V2 : For 2E10-110-RX & 56VDC/65W
Power Adapter use
CH-110-V2 : For 2E11-110-RX use
AETEK INC.
3F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.
|
T
:
+886-2-82452822
|
W
:
www.aetektec.com
|
E
:
All specifications are subject to change without noice.
Copyright © 2020 AETEK INC. All rights reserved.
100m
200m
400m
600m
0.4mm Cable 26AWG
Watt :
18W
Watt :
8.06W
X
X
0.5mm Cable 24AWG
Watt :
23.8W
Watt :
12.1W
Watt :
6.1W
X
0.6mm Cable 22AWG
Watt :
32.3W
Watt :
17.2W
Watt :
8.4W
Watt :
5W
INSTALLATION
2 wires Link
Connect to EPo2 TX
2 wires Link
Connect to EPo2 RX
Connect to PoE Switch
or PoE Injector
Connect 56V/65W
Power Adapter
Connect to
PoE IP Camera
Connect 56V/65W
PowerAdapter(Option)
PoE On/Off Switch
2E10-110-RX
2E10-110-TX
2E11-110-RX
2 Wires LINK pin assignment
PWR
LINK
LAN
JOIN
56VDC
1-Port EPo2 Rx
2 Wire LINK
V-
V+
PWR
LINK
LAN
Po
E
JOIN
1-Port PoE PD EPo2 Rx
2 Wire LINK
V-
V+
PWR
LINK
LAN
Po
E
JOIN
On / Off
56VDC
1-Port EPo2 Tx
Po
E
2 Wire LINK
V-
V+
V- V+
Connect to
Switch
2 wires Link
Connect to EPo2 TX
Join Button
Join Button
Join Button
⃰ When Connect PoE Switch Data or PoE port ,The DIP Switch need off.
Join Button
• Press the Join button for 1-3 seconds on both Local and Remote Extenders to Link them.
• Press the Join button on the Remote Extender for 5-8 seconds to disconnect the Link between the Extenders
• Press the Join button for 10~15 seconds to reset the Extender to default.
