1. Use CAT5e or CAT6 UTP/STP cables and 2
wires cables.
2. Please avoid using low quality cables, which will seriously limit the cabling distance and power delivery.
3. Make sure the power source is sufficient for your configuration.
2E10-110-RX / 2E11-110-RX / 2E10-110-TX EPo2 Adapter
Model
Power Source
Description
2E10-110-RX
DC
EPo2 DC in Rx Adapter, 1x BNC, 1x FE RJ45, 1 DC Jack, -20ºC~60ºC
2E10-110-TX
EPo2 Tx Adapter, 1x BNC, 1x FE RJ45, 1 DC Jack, -20ºC~60ºC
2E11-110-RX
PoE
EPo2 PoE in Rx Adapter, 1x BNC, 1x FE RJ45, -20ºC~60ºC
IMPORTANT
:
INTRODUCTION
CONNECTION
PACKAGE CONTENTS
Quick Installation Guide
* 1x Quick Installation Guide
* 1x 56VDC/65W Power Adapter (2E10-110-RX only)
PoE (Data + Power)
Ethernet (Data)
2 wires Cables (Data + Power)
2E11-110-RX
2E10-110-TX
2 wires
Application :
2E10-110-RX
Network Switch
2E10-110-TX
H30-044-90
NDR-240-48
240W Power Supply
UPoE Swich
Doorbell wire
or
Telephone line
2 wires
Doorbell wire
or
Telephone line
Caution !
You must turn off the 48VDC input on the line from the telephone company before you install EPo2 over existing
telephone line
You must turn off the power input on the doorbell line from the your power box of room controller before you install EPo2
over existing doorbell line
2E10-110-TX
2E10-110-RX
Network Switch
2 wires
Doorbell wire
2E10-110-TX
2E10-110-RX
Network Switch
2 wires
Doorbell wire
P/N: A625003300G
