P a g e
|
11
Time Clock opening and closing of
gates
timeclock/automatic/autoclosing
Note: There are 2 main ways your installer can set up
gate automation. 1: Automatic closing
– this is when you
typically open your gates via intercom or fob, and they
close automatically again after a pre-set time delay. If
your gates operate in this way, then you can use this
screen to control them to open and close at pre-set
times of the day and week.
Step1
– Select the days you wish to open, and type in
an opening time in 24hr format, e.g. 830am = 0830.
Press SAVE. This will automatically latch on the main
relay 1 on the intercom at that time for each day
selected.
Step2
– Select the days and times that you may wish for
the gates to close automatically again, say for example
at night, and enter that time in the CLOSING TIME
space and press SAVE.
Step-by-Step Gates
timeclock/automatic/step-by-step
This screen is used for gates where typically if you use
the intercom or a fob to trigger your gates to open, they
remain open until such times you decide to close them
again and press the fob or trigger from intercom again.
You can select days and times to trigger the gates
automatically so you don’t have to. For example, some
home owners keep their gates open all of the time, but
would like them to close automatically at night. In this
example, select all the days, and enter time. E.g.
11.30pm = 2330. Press SAVE.
This will send a momentary command to the gate each
day at the set time and trigger it to open if it is already
closed, or close if it is already open.
You may have up to 4 opening or closing events per
day.