BVCAM Wireless IP camera setup instruction
(Camera / DVR Board)
(Version 1)
Main Feature:
1
HD video quality. Camera has built-in Access Point (AP) for easy use and setup.
2
WiFi and Remote internet view. Plug & Play internet view setup.
3
Fully programmable, Removable SD for recording video and playback.
4
All the Spy camera are hand made in US and fully tested before shipping to Amazon
CAUTION:
Covert recording may not be legal in your state. Please check the legalities
on covert video/audio before using this camera.
Before you setup camera:
1.
First of all you need Wi-Fi network in order to setup, operate, and view the camera.
Also be sure your Wi-Fi connects to the internet. (Because if you want remote control
and view the camera over the internet, your Wi-Fi network must connect to the
internet.)
2.
Secondly you need an iPhone or Android smart phone to setup & operate camera.
3.
You need to download ‘BVCAM” from your phone’s App store and install the
BVCAM to your smart phone.
4.
Before you start setup up the camera, you should know your Wi-Fi network’s SSID
and login password.
5.
Locate the reset button (Pic on Page 3). Use a pen or a small paper clip to press the
reset button, hold 5 seconds till the light turns off. Then release the reset button.
The light will blink blue/red when ready to set up.
6.
Locate the device ID (BVCAM- ID). It’s a silver sticker with a QR code located on
the body of DVR board.
7.
System support 32GB micro SD card for storing video.
Setup camera
for Access point or Wifi
:
(iPhone)
1.
On your smart phone, enable Wi-Fi then search for Wi-Fi networks in your area.
2.
You will see the IP camera on the WiFi list. It will show up as a character/numerical
name format (PQ1C854-F1C89CA4C9CA, for example), Connect to that IP camera.
3.
If you do not see the IP camera under your Wi-Fi device list, please reset the camera
and wait 30 seconds, then search again.
4.
Open “BVCAM” on your phone.
5.
Press the (+) sign > click “Add new online Camera”, > click “QR Scan” > scan the
QR Code on the bottom of the clock. When the QR Code is read correctly your phone
will vibrate and go back the previous page. Then click “OK”.
6.
Now you will see the camera icon, click the camera icon, (Skip change PW)you
should see the camera live image.
Now your smart phone is connecting to the camera
access point (AP).
7.
Then you need set camera to connect to your Wifi network, Go back BVCAM main
screen, Click the cogwheel next to the camera icon > Click “Device Settings” > click
“WiFi Config” > choose your WiFi network from the list > input the password, then
click OK. >Device reboot.
8.
Now the camera will reboot and your phone will disconnect from the IP Camera’s AP
network. Wait 60 secs then refresh the page. You should see the camera icon and
“Online” displayed in blue. Your camera is now connected Wifi network.