AES 603 FB, Installation & User Manual, Page: 9 / 12

P a g e | 9
Using the keypad
Using the standard codes
…
Once you have exited out of programming mode, simply enter the user code.
Using super user codes
? ? ? ? # 1
Activate output 1
? ? ? ? # 2
Activate output 2
? ? ? ? # 3
Activate output 3
The Handset
The handset should be charged for 8 hours before use. It is recommended to give it at least 1
hour charge before range testing.
MENU
12.21
Charging
base
Power
LED
ON/OFF
Vibration
ON/OFF
Voicemail
Symbol
Battery
Level
Reception
indicator
Code
Button
To listen to voicemail, press MENU to play. If there are more than 1 message, press and
to select the message required and press MENU to play.
= Delete. Long press = delete all.
Re-coding the Handset / Adding an Extra Handset
Occasionally a system may need re-coded once installed. If the handset does not ring when the
call button is pressed, it may need re-coded. The procedure for doing this is the same as for
adding an additional handset as follows…
Once the melody is heard, the handset should then be working. The system should now be ready
for testing.
Change Ring Volume
Press and to increase
and decrease ring volume
and press MENU to save.
Change Ring Tone
Press and the handset will
ring with its currently selected
tone.
Press and to cycle
through available ring tones
and press MENU to select
and save.
Ring Another Handset
Press and the unit will
display HS1-5 depending on
how many handsets are coded.
Press and to select and
then MENU to call that handset.
Voicemail
When a call is not answered
within 40 seconds, the visitor
can leave a
message. Once
complete, the handset will
display the
symbol. The unit
can store up to 16 messages.
N
/O
N
/C
+
Code
button
C
-
1
2
v
0
v
12v
IN
1) Press code button for 3 seconds
on the transmitter unit, PCB lights will
flash and bleep heard from speaker.
MENU
2) Press handset code button with thin
object for approx 6 seconds until Di-Do-
Do melody heard.
HANDSET TRANSMITTER