P a g e
|
19
Complete list of parameters
The table below show the complete list of features.
Changing pass codes
9999
#
01
????
#
Change
programming password
9999
9999
#
02
????
#
Change access control password (SMS control of relays, or
non-stored numbers can call intercom & enter code to
activate output 1).
1234
9999
#
03
????
#
Change monitoring mode password (user can call the
intercom, enter this pass code to listen in and speak)
5555
Dial out numbers
9999
#
1
XY????
#
Store dialling out numbers. (X = button number 1-9 & 0 for
button 10) (Y = number dialled 1-4) (???? = phone number)
N/A
9999
#
1
XY*
#
Delete a dial out number. (X = button number) (Y = number
position 1-4)
N/A
Timings
9999
#
50
?
#
Relay 1 time. ? = seconds, 1-9999
1 sec
9999
#
51
?
#
Relay 2 time. ? = seconds, 1-9999.
1 sec
9999
#
45
??
#
Calling time for first number, adjust this to avoid voicemail
picking up a call (10-99 secs)
20 secs
9999
#
46
??
#
Calling time for second number, adjust this to avoid voicemail
picking up a call (10-99 secs)
20 secs
9999
#
47
??
#
Calling time for third number, adjust this to avoid voicemail
picking up a call (10-99 secs)
20 secs
Scheduled service calls
9999
#
77
number
#
Store a service number to receive a scheduled call or SMS
from the unit. Useful for SIM cards which are not often used
to prevent switch off by the network provider.
N/A
9999
#
57
??
#
Set the time schedule for the intercom to make a scheduled
call or SMS to the service number. 00-60 day time schedule.
00 = no call or SMS.
00
9999
#58
?
#
Choose between making a scheduled call or scheduled SMS.
1 = SMS. 2 = call.
1
9999
#
77
*
#
Delete the stored service number
N/A
Caller ID features
9999
#
72
number
#
Store caller ID number. Max 14 digits. Only last 6 digits
compared.
N/A
9999
#
73
number
#
Delete caller ID number.
N/A
9999
#
73
*
#
Delete all caller ID numbers
N/A
Service & diagnostic messages (no passcode required for some of these!)
*
20
#
Check reception level 1-31 (no passcode needed)
N/A
*
21
#
Check stored numbers. O = dial out number. I = dial in
number. E = end of message. (no passcode needed)
N/A
*
22
#
Check input status and relay status. (No passcode needed)
N/A
