RELAY 1
R2
8.000
1
2
.0
0
0
N/ C
| C |
N/ O
N/ C
| C |
N/ O
THE AES KEYPAD IS AN
OPTIONAL EXTRA.
PLEASE SEE
‘KPX1200 GUIDE’
FOR FULL INSTRUCTIONS ON
PROGRAMMING AND
EXTENSIVE FEATURES.
N/ O
C
N/ C
OPTIMAL RANGE
705 DECT
WIRING DIAGRAM
TIP:
For longer range installations, locate the handset closest to the front of the
property and near a window if possible. Also ensure the antenna is mounted
pointing towards the handset.
Concrete walls can reduce the normal open-air range of up to 450 metres by
30-50% per wall
.
TIP:
Most technical calls received are due to installers using CAT5 or alarm cable
to power the unit.
NEITHER
are rated to carry enough power!
( 1.2amp peak )
Please use the following cable:
Up to 2 metres ( 6 feet )
–
Use minimum
0.5mm
2
( 18 gauge )
Up to 4 metres ( 12 feet )
–
Use minimum
0.75mm
2
( 16 gauge )
Up to 8 metres ( 24 feet )
–
Use minimum
1.0mm
2
( 14 / 16 gauge )
POWER CABLE
Code
Button
SPK
Normally Open
Common
Normally Closed
RELAY CONNECTIONS
RELAY 1
TRANSMITTER
Transmitter Module
WARNING:
ESD SENSITIVE
DEVICE
AES 24v Power Supply
* ALWAYS RANGE TEST THE UNIT ON SITE BEFORE INSTALLATION *
- Radio Intercom System
MAGNETIC LOCK EXAMPLE
TRANSMITTER
AES KEYPAD
NEED MORE ASSISTANCE?
Please scan this QR Code to be
brought to our Resources page
where you can find all of our
guides and available resources.
LIGHTNING PRONE AREAS
MUST USE SURGE PROTECTION
FOR POWER SUPPLY!
AES KEYPAD
Follow this method when using a magnetic lock. If the relay in either the
Transmitter or
optional AES Keypad
is triggered it will temporarily lose power
and allow the door/gate to release.
For installs without the
optional AES Keypad
; connect the
POSITIVE
of the
Magnetic Lock PSU to
N/C
terminal on Transmitter Relay.
12vO
UT
Link both Relay 1’s to
allow either to release
the same door / gate.
24v IN
CALL
MIC
AES KEYPAD
DECT ANTENNA
Both leads of the
antenna are
required as the
audio and video
signals are
transmitted over
separate
frequencies.
STILL HAVING TROUBLE?
Find all of our support options such as Web Chat,
Full Manuals, Customer Helpline and more on
our website:
WWW
.
AESGLOBALONLINE
.
COM
Please only use power supply provided. Do
NOT
power any additional devices from this power supply.
SYSTEM INCOMPATIBLE WITH FOIL INSULATION.
KEEP POWER SUPPLY AS CLOSE AS POSSIBLE.
SITE SURVEY
RESTOCKING FEES MAY APPLY IF RETURNED AFTER INSTALL DUE TO SITE
ISSUES. PLEASE SEE FULL T&C’S ON OUR WEBSITE.
With our 705 DECT video system you can add
up to a max of
4 portable handsets
or wall
mounted versions.
( 1 VIDEO HANDSET MAX. )
Did you know?
TIP:
It is recommended that the system be fully tested on site
BEFORE
installation.
You must test to ensure that the system is capable of operating across the desired
range. Power the system on and place the handsets in their expected locations
around the property to ensure that the system is fully functional and suitable for
the site.
Pre-wired MIC connection
Pre-wired
SPEAKER
connection
N/ C
| C |
N/ O
N/ C
| C |
N/ O
Programming LED will
illuminate on the
underside of the PCB
MAX 24 VOLTS!
POWER ADAPTER
MAINS
POWER
MAGNETIC LOCK
+
-
-
+
* MAGNETIC LOCK PSU SOLD SEPARATELY *
EXIT
