3
PRODUCT CONTENTS
Power Wiring Assembly
INSTALLATION STEPS
1.
Clean the mounting area on
the Mini Split with alcohol
to remove any dirt, oils or
grease which may prevent
the mounting tapes from
adhering.
2.
Connect the power leads to
the rear of the unit.
WARNING
-
Before you begin installation, verify the Mini Split HVAC
system is turned off and disconnected from the power source. Failure to
disconnect the power may result in severe electrical shock.
CAUTION
-
Never look directly at the ActivePure cell while illuminated. This
cell produces UVC light which is known to cause damage to eyes.
WARNING
-
This unit must be installed by a licensed HVAC contractor.
Failure to do so will void warranty of the product.
Your Sanctuairy Mini EM carton will contain the following:
• Sanctuairy Mini EM unit with 230 Volt Ballast
• Power Leads
• Installation Manual
