Aerpro MagMate APSMVLOK, Manual

Page: 4 / 8

Vent Clip Installation (Pic2)
1. Unfasten clip sufficiently by rotating the
clip lever.
2. Insert clip to the center of the 3 vents,
vent 2 as shown on (Pic2) and attach fixing
plate to vent 1 & 3 as shown on (Pic2) to
avoid shaking while driving.
3. If this way of fixing the clip is not possible,
attach fixing plate to the vent frame and
insert clip to a suitable vent.
4. Fasten lever whilst pushing clip deeper so
as to avoid the presence of any gap
between fixing plate and vent.
5. Check if vent clip is fixed firmly and
correctly.
6. If the fixing plate is not required, unfasten
clip lever and remove fixing plate.