87.5 -‐ 108MHZ.
5.2.4. It has dual USB ports (Only #10 in diagram on Page 1 can read USB drives ; the
maximum output current is 5V/2.1A. When dual ports are used at the same time, the
total current is no more than 2.1A; When using one port to play music from your USB
drive ,the other port can also be used to charge devices.
5.3 Audio output mode
5.3.1 Use the line output for headphones or connecting the
APBT200
directly to AUX
input of the cars radio.
Reminder: when the line output has a cable inserted, the transmission with bluetooth
is muted by default, once removed auto-‐recovery reverts to the transmitted sound.
5.4 Switching between the Bluetooth mode and USB play mode
Long press
to switch between Bluetooth mode and USB play mode. When USB
drive is not inserted, it cannot switch Uc
disk mode.
Note: Wait for 10s after turning on the
APBT200
before pressing
5.5 Car battery voltage display mode:
When switch to the U / I(Voltage/current), the display shows the car battery voltage.
(Voltage display range: 9-‐30V, over range display HHH; error ± 1V)
Tips: Voltage displayed on device is operating voltage, when it lower than 12V,
display flashes; please check if the battery voltage is normal to avoid car not start
caused by battery fault.
5.6 Load current display mode:
The switch to the U / I(Voltage/current), connect the load, Scrolling displays the load
current / car battery voltage. (Load current is less than 0.13A does not display .Error ±
0.1A)
5.7. Charging
intelligent recognition
When plug a USB lead into to the charging port (#11 in diagram), it can recognize the
device type intelligently and provide max charging current to save charging time.
6. Powerl off memory
Each time you turn off the
APBT200
the system will memorize the information like
the FM frequency and the song you are playing . And when you use it next time,
the song
will continue being played. But when you remove or change the storage or the system
detects the wrong status, the system will play the first song .
7. Technical Parameters
Rated working voltage
12V-‐24V
Limit working voltage
9 ~ 26V
USB output
5V/2.1A
Working temperature
0~50
Charging intelligent recognition
support
Play format
MP3
Battery voltage display accuracy
Error ±1V
Load current accuracy
Error ±0.1A
SNR
>60dB
Degree of distortion
<0.1%
Frequency response
20Hz-‐15Khz
Resolution of right and left channel
>60dB
Bluetooth version
Version
5.0
+EDR
Bluetooth sound processing
A2DP (Advance Audio Distribution
Profile) function supported
Bluetooth transmission distance
less-‐than 10M
Effective distance of Bluetooth microphone
0.5-‐2M
FM frequency
87.5~108Mhz
FM Mode
Stereo digital PLL frequency locking
8. Attention/Warning
1. This product contains dual USB outputs, both support two-‐way plug USB,
It can
charge two devices at the same time with the maximum output of 5V/2.1A.
2. There is only one port for USB playback which is showed in the picture on page 1
3. When USB drive is inserted and then Bluetooth is turned on, boot priority is the
Bluetooth connection (after 17 seconds no Bluetooth pairing is successful,
automatically switches to the USB drive mode); when the Bluetooth connection is on
and then USB drive is inserted, the latter takes precedence.
4.Never turn the volume to be too loud when FM is working so as to avoid the sound
distortion. Please adjust the sound volume through the car audio.
5. A built-‐in antenna is provided for the product, so please avoid using the
broadcasting station frequency that is with strong signal so as to get better sound
effect.
6. The procedure to pair your phone via Bluetooth may differ depending on what
phone you have.
7. Some phones may not support automatic connection if they are powered on after a
power failure. If this is the case, please connect it manually.
8. This product is compatible with more than 95% phones on the market but some are
still incompatible. Please make sure your phone is compatible with this product.
9. Do not use this product in environments with high temperatures, dust or moisture.
10. Avoid dropping the product to prevent damage to the surface or the body.
11. The Bluetooth of this product supports background play. If there is a prompt tone
when playing music via USB drive, it will be automatically switched to the Bluetooth
mode. It will return to USB drive mode after ending the cue tone or call.
What’s in the box
1.
APBT200
Bluetooth Car Charger
2.User Manual
3.Auxiliary Cable
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure and
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure.
Technical Assistance
If you need assistance setting up or using your Aerpro product now or in the future,
call Aerpro Support. Australia. Mon-Fri 9am – 5pm AEST
TEL: 03 – 8587 8898
FAX: 03 – 8587 8866
Please retain this user guide for future reference.
If you would like to download a digital copy of this manual, or other Aerpro manuals/
software, please visit the Aerpro.com website and search for information on your
model.
