8
JUMP STARTING
WARNING
Explosion Hazard
-
USE ONLY IN WELL VENTILATED AREAS.
The jump
start cable clamps MUST be connected in correct polarity ~
RED
clamp
to the battery Positive (+) and
BLACK
clamp to the battery Negative (-)
terminals, making sure they have a good connection. A reverse polarity
connection (positive to negative) can cause damage to the
COMPACT
JUMP STARTER
and/or create a sparking/explosion hazard.
USE ONLY THE AEPRO PREMIUM PROTECTION CABLES.
Use of other
cables may result in damage to the
COMPACT JUMP STARTER
, fire,
personal injury and damage to vehicle or property.
For Jump Starting 12V Vehicle
1.
Before attempting to start 12V vehicle, please make sure at least 3 LED lights
are illuminated on the
COMPACT JUMP STARTER
when pressing the power
button.
2.
Connect the Red clamp to the battery Positive (+) and Black clamp to the
battery Negative (-) terminals, making sure they have a good connection.
WARNING
:
REVERSING THE CONNECTIONS MAY RESULT IN DAMAGE TO
THE
COMPACT JUMP STARTER
, FIRE OR PERSONAL INJURY.
3.
Insert the blue connector firmly into the Jump Start port. (If below 0
o
C,
please allow a few minutes before starting the vehicle)
4.
Start the vehicle.
CAUTION: DO NOT CRANK IGNITION FOR MORE THAN 3
SECONDS.
If vehicle does not start, wait 1 minute before trying again.
5.
Once vehicle is started, unplug the blue connector from
COMPACT JUMP
STARTER
and then remove the battery clamps.
START
