and then pair the devices within 10 meters.
Notes about ABT510B
The ABT510B will automatically re-connect with the
Bluetooth device when powered on.
In case it has failed to pair after 10 minutes, the device will
automatically change to Auto Standby Mode.
If it has failed to pair, please try turning the ABT510B off and
try again. If it still fails to pair, please restart your
smartphone or Bluetooth enabled device.
When a device is connected to the ABT510B and there is
some sort of problem such as signal interference or it is out
of range and disconnects, the ABT510B continue to try to re-
connect within 3 minutes. If the re-connection is over 3
minutes but within 15 minutes, press the ‘Bluetooth Button’
to awake the device and it will connect and work normally.
Power saving mode
When the ABT510B is not connected to any Bluetooth device, it
will automatically power off after 15 minutes.