MSKAEMD:UM 09/06/17
MASK SPECIFICATIONS
Model
4110-725-
( )…………………………..For PB1, PB2, SC, or SK Outlets
Weight…………………………………………………………………14.5 Oz
Material……………………………………..Silicone, Aluminum (Anodized),
ABS, Carbon Composite
Certified Max
imum Altitude ………………………...………….40,000 Feet
Communications …………………….Electret Microphone/Acoustic Foam
Communicat
ions Plug ……………..…………………………………PJ068
Service Overhaul…………………...3 years from manufacture date code
Oxygen System Requirements
Breathing Oxygen ……………..Aviators O2 per MIL-PRF-27210
Minimum Oxygen Flow………………………100 liters per minute
Ambient Temperature…………………..…………….70° F (21° C)
Normal Pressure ………………………………………55 to 70 Psi
O
perating Temperature Range....….+20° F to +120° F (-7° C to +49° C)
Relati
ve Humidity…………………………………..………5 to 95 percent
Storage Temperature
Normal………....……….……+20° F to +120° F (-7° C to +49° C)
Extreme (See Stowage).
….-67° F to +160° F (-55° C to +71° C)
Installation and Application
The conditions and tests required for TSO approval of this article are
minimum performance standards. It is the responsibility of those desiring to
install the article on or within a specific type or class of aircraft to determine
that the aircraft installation conditions are within the TSO standards. TSO
articles must have separate approval for installation in an aircraft. The
article may be installed only if performed under 14 CFR Part 43 of the
applicable airworthiness requirements.
Normative Reference Information
aerox®
Diluter Demand Oxygen Masks meet the requirements of TSO-
C78A and TSO-C89A and the following tailored reference requirements.
SAE 8026A
SAE 8027
RETAIN THESE INSTRUCTIONS
DO NOT DISCARD
OPERATING INSTRUCTIONS AND EQUIPMENT
LIMITATIONS FOR
SHAW AEROX LLC
4110-725 SERIES
FAA TSO-C78A & TSO-C89A APPROVED
QUICK DONNING, DILUTER DEMAND CREWMEMBER
OXYGEN MASK
IMPORTANT WARNING!
READ ALL INSTRUCTIONS AND EQUIPMENT LIMITATIONS BEFORE USE.
IMPROPER USE OF THIS DILUTER DEMAND OXYGEN MASK MAY RESULT
IN SERIOUS INJURY, ILLNESS, OR DEATH.
DO NOT USE THIS MASK UNLESS YOU ARE CLEAN SHAVEN. BEARDS,
STUBBLE, OR SIDEBURNS WILL PREVENT AN ACCEPTABLE FACE PIECE
SEAL. FACIAL HAIR MAY INTERFERE WITH THE DILUTION DEMAND
FUNCTION.
ABSENCE OF ONE OR BOTH DENTURES CAN SERIOUSLY AFFECT THE FIT
OF THE THIS OXYGEN MASK.
DO NOT ALTER OR MODIFY ANY COMPONENT OF THIS OXYGEN MASK.
DISCONTINUE USE IF YOU EXPERIENCE SKIN IRRITATION OR
DISCOLORATION
.
THIS MASK IS INTENDED FOR USE IN THE AVIATION INDUSTRY FOR PILOT
AND CREW AFTER RECEIVING PROPER INSTRUCTION AND TRAINING.
USERS MUST CLEAN AND MAINTAIN THIS OXYGEN MASK IN ACCORDANCE
WITH
aerox®
INSTRUCTIONS.
DO NOT EXPOSE OXYGEN MASK TO ANY PETROLEUM BASED PRODUCTS.
(ie LIP STICK, LIP BALM, LIP GLOSS AND VASELINE.) USE OF THESE
PRODUCTS IN AN OXYGEN RICH ENVIRONMENT PRESENTS A SERIOUS
FIRE HAZARD.
