AeroVironment TurboDX EVSE-DX, Installation Manual

Page: 6 / 24

2
WARNING
SYMBOL USAGE
Indicates information about safety practices which, if not
followed, may result in serious injury or death.
......................................................................................................
Indicates information about safety practices which, if not
followed, could result in personal injury or are necessary to
prevent fire or equipment overheating.
......................................................................................................
Indicates helpful information for installation or usage, but
does not contain personnel or equipment safety related
information.
ABOUT YOUR TURBODX EV CHARGING STATION
Welcome to your TurboDX EV Charging Station – our easy-to-use, compact
power supply for your electric vehicle’s on-board charger. The charger supplies
and manages AC power to your electric vehicle and is compatible with a variety of
battery electric and plug-in hybrid vehicles.
KEY FEATURES
• Compact design
• Overheating protection
• Network flexibility (select models)
• Quick-read status indicators
• Underwriters Laboratories (UL) listed
• SAE J1772 compliant
• Auto-restart in event of ground fault or power outage
240 VAC Operation: the charger requires either a 240 VAC split phase or a 208
VAC two phase dedicated circuit. It draws a maximum of either 16-amp or 32-
amp continuous current and requires a 20-amp or 40-amp rated circuit breaker.
It is recommended that electrical outlets for use with your charger be
installed by a licensed, qualified electrician. To avoid serious injury or death,
installation must comply with the provisions of the National Electric Code
(NEC) and all local codes. In cases of conflict between local codes and the
NEC, local codes shall take precedence.
(Plug-in Model only)
DANGER
NOTE
WARNING