2017-2020 © AeroVironment, Inc. Proprietary Information. Export Controlled Information. Use or disclosure of information contained on this page is subject to the restriction on the title page of this document. 87732_10
17
Replacing the Props
Props need to be replaced if there are
visible scratches, chips, cracks or other
signs of damage. Damaged props can
degrade flight imagery.
Remove props by gripping the motor
and unscrewing the prop in the direction
indicated by arrows on the prop.
Replace the prop by turning it in the
direction indicated by arrows on the prop
until firmly seated against the motor.
Changing the Battery
While gripping the fuselage, squeeze the
tabs on both sides of the battery. Lift the
battery out of the aircraft. When placing
the battery pack back into the aircraft,
listen for a “click” sound to ensure it’s
locked in place.
REPLACING THE PROPS
Recessed dot
Recessed dot
Silver dot
Cleaning ILS and Camera Lenses
If the lenses get dirty, gently clean with the included cleaning package. Take special
care to prevent micro-debris from scratching the lens surface.
To Clean:
•
Use air bulb to blow dust and dirt from lens surface.
•
Gently brush away any remaining debris.
•
Repeat air bulb application to ensure lens is free from dirt particles.
•
Examine lens for water spots or fingerprints.
•
Remove any fingerprints or water spots with the included lens pen.
CHANGING THE BATTERY
Maintenance
Summary of Contents for Quantix Mapper
Page 31: ...User Manual...
