Aerotech OD301MNZ Manual Download Page 3

3

Set Automatic Stop Cooking

Press the 

STOP TIME

 button and turn the 

PUSH TO CLEAR

 knob to display

the time the oven is to switch off.  Then choose the cooking mode and
temperature.  These settings will be adopted and will activate after 8 seconds.
“Auto” and the remaining cook time will show in the clock display.  When the
selected cooking time is finished, the oven will beep and cooking will cease.
The temperature and oven mode displays will dim and “Cook Time” and
“Auto” will flash in the clock display.  If the oven mode and temperature dials
are turned to OFF, the oven will revert to normal operation after 8 seconds.

User Select Modes

This allows the user to configure some of the settings displayed on the control
panel.  To enter User Select mode, ensure that the oven mode and
temperature dials are off and that no automatic/delayed start programs are
operating.  Press and hold the 

TIMER

 and then 

CLOCK

 buttons and hold

down together until the oven beeps (about 2 seconds).  The oven mode
display (left hand one on dual ovens) will display “User Select”.

The user select modes that can altered are as follows:

Sabbath Mode

Sabbath mode is designed for religious faiths that observe a “no work”
requirement on the Sabbath.  When the oven is in Sabbath mode:

·

 

The oven will not turn off automatically.

·

 

Clock, temperature and oven mode displays will be disabled.

·

 

No tones will sound.

·

 

No error messages or temperature changes will be displayed.

·

 

The oven cavity lights are on.

To set the Sabbath mode:

·

 

Enter the User Select mode.

·

 

Turn the oven mode dial until “Sab Mode” appears in the display.

·

 

Turn the 

PUSH TO CLEAR

 knob to select the length of time the oven is to

be kept in Sabbath mode.  The maximum is 99 hours in 1 hour steps.
Turn the temperature dial to select a temperature.  Bake is the only oven
mode that can be used in Sabbath mode.

·

 

To start Sabbath mode, press 

PUSH TO CLEAR

.  The oven mode will

show “Sab Mode” with no back light.  The temperature display will show
“---”.  Temperatures can be adjusted but the display will not change.

Summary of Contents for OD301MNZ
















Reviews: