Tightening torque values for the mounting hardware are dependent on the properties of the surface
to which the stage is being mounted. Values provided in
are typical values and may not be
accurate for your mounting surface. Refer to
for specific model mounting locations and
dimensions.
Table 2-1:
Stage to Mounting Surface Hardware
Mounting Hardware
Typical Screw Torque
M6 or 1/4-20 SHCS (3 places)
7 N·m
Figure 2-3:
Mounting Hole Locations
HEX300-230HL Hardware
Manual
2.3. Securing the Hexapod to the Mounting
Surface
www.aerotech.com
21
