Introduction
Ensemble LAB Hardware Manual
1.1. Electrical Specifications
The electrical specifications for the Ensemble LAB are listed below.
Table 1-2:
Electrical Specifications
Description
Ensemble LAB
Power
Supply
Input Voltage
100 VAC
115 VAC
200 VAC
230 VAC
Input Frequency
50-60 Hz
Inrush Current
7 A
8 A
13 A
15 A
Maximum Continuous
Input Current
2 A
2 A
1 A
1 A
Input Current
Aerotech doesn't specify the input current or power to the drives
because it is dependent on the amount of real power being
delivered to the drive (refer to
).
Output Voltage
(1)
±22.5 V @ 5 A
Peak Output Current
(1)
5 A
Continuous Output Current
(1)
2.5 A
Bus Voltage
±24 VDC
Power Amplifier Bandwidth
(1)
2500 Hz Maximum (software selectable)
Minimum Load Resistance
0.5 Ω
Output Impedance
0.3 Ω
User Power Supply Output
5 VDC (@ 500 mA)
Mode of Operation
Brush, Stepper, Brushless
(2)
1. Load Dependent
2. The Brushless motor mode of operation is only available if the -2DS, -3DS, or -4DS option has been purchased.
16
Chapter 1
www.aerotech.com
