Aerotech BL 10-40, Hardware Manual

Page: 13 / 68

Introduction BL
1.1. Electrical Specifications
The electrical specifications for the BL are listed below.
Table 1-2: Electrical Specifications
Description BL 20-40 BL 10-40 BL 10-80
Motor Supply Input Voltage 100, 115, 200, 230 VAC (model dependent)
Input Frequency 50-60 Hz
Inrush Current 10, 11.5, 20, 23 A (model dependent)
Maximum Con-
tinuous Input Cur-
rent
5.66 A
rms
2.83 A
rms
5.66 A
rms
Control Supply Input Voltage 85-240 VAC
Input Frequency 50-60 Hz
Inrush Current 16 A
Input Current .25 A max
Output Voltage
(1)
±36V @ 20A ±38V @ 20A ±78V @ 10A
Peak Output Current 20 10 10
Continuous Output Current 10 5 5
Power Amplifier Bandwidth 2 kHz
Minimum Load Resistance 0.5 Ω
Output Impedance 0.2 Ω (each phase)
User Power Supply Output 5 VDC (@ 500 mA)
Modes of Operation Brushless; Brush; Stepper
Protective Features Peak current limit; Over temperature; RMS current limit;
Dynamic power dissipation limit; Designed to EN61010/UL3101
Isolation Optical and transformer isolation between control and power
stages.
(1) Load Dependent
www.aerotech.com Chapter 1 3