AOM130 User Manual
Mechanical Installation
Chapter 2: Mechanical Specifications and Installation
W A R N I N G : AOM130 installation must be in accordance to instructions provided by this
manual and any accompanying documentation. Failure to follow these instructions could result
in injury or damage to the equipment.
2.1. Unpacking and Handling the Stage
D A N G E R / H E A V Y : Manually lifting and moving the stage requires a minimum of two
people on either side of the stage. Refer to
for stage mass specifications.
l
Do not attempt to lift heavy loads single handed.
l
Follow the lifting instructions and only manually lift from the specified surfaces (if lifting
hardware hasn't been supplied).
W A R N I N G : It is the customer's responsibility to safely and carefully lift the stage.
l
Make sure that all moving parts are secure before moving the AOM130. Unsecured moving
parts may shift and cause bodily injury.
l
Improper handling could adversely affect the performance of the AOM130. Use care when
moving the AOM130.
N O T E :
If any damage has occurred during shipping, report it immediately.
Lifting Instructions
To avoid injury, use two or more people to move and install this product.
Obey your cleanroom and vacuum preparation handling procedures when opening the containers. Unpack
the AOM130 as near to the installation location as possible to minimize contact with the parts. Open each
container and inspect the contents for signs of damage.
Remove the packing material and keep it to store and transport the gimbal in the future.
www.aerotech.com
Chapter 2
13
