7
AEROSMITH INSULATION GAS TOOL OPERATIONAL MANUAL
AEROSMITH INSULATION GAS TOOL OPERATIONAL MANUAL
AEROSMITH INSULATION GAS TOOL OPERATIONAL MANUAL
Tool sleeve or O-
Rings are dirty.
Contact authorized ser-
viceman for repair.
SYMPTOM 4
Unstable performance.
Possible
reasons
Services
Built-up dirt and
debris
inside cylinder
Contact authorized ser-
viceman for repair.
SYMPTOM 5
Diminishing power.
Possible
reasons
Services
Damaged piston
or cylinder.
Contact authorized ser-
viceman for repair.
E. Returning/Purging Stage of
Operation
SYMPTOM 1
Tool operated and drove fastener, but piston did
not return to up position.
Possible
reasons
Services
Mushrooming of
Piston Tip.
Contact authorized ser-
viceman for repair.
Exhaust ports on
the sleeve are
dirty or clogged
Contact authorized ser-
viceman for repair.
Tool (Sleeve) or
O-Rings are dirty.
Contact authorized ser-
viceman for repair.
SYMPTOM 2
Combustion Chamber does not drop after tool
cycles.
Possible
reasons
Services
Contact arm is
bent, or tool is
dirty.
Clean tool or replace con-
tact arm as require
