Aeros COMBAT-C, Owner'S Service Manual

Page: 11 / 27

11
Figure 18
14. Install the nosecone taking care to align it so that it
lies flat on the top and bottom of the sail (Fig.20).
WARNING
Don’t fly without the nosecone.
Figure 19
15. Attach plastic winglets. Put front part of the winglet
between the sail and the outer part of the leading edge
tube (Fig.19).
Put the winglet tightly inside the sail, fixing it with
Velcro.
16. Zip up the center sail zipper.
17. Undo the Velcro and insert the control frame apex protection pads inside the sail. Turn the hang point spreader
bar perpendicular to the keel tube
(Fig.20).
Close the central access zipper (Fig.21).
Figure 20 Figure 21
18. Install the tail on the glider:
- Take the tail out of the bag. Connect the outer tail sections with the center tail section, installing the spar of the outer
tail first and then the pin at the trailing edge of the outer tail in to the corresponding holes in the center tail (Fig.22).
Make sure that button springs of the outer tail sections spars are fully engage into the holes in the undersurface of
the center tail section (Fig.23).