MRK-D-0034 V2.0
Aeroqual AQM 65 User Guide
Page | 92
5.5 Aeroqual integrated calibration system AirCal 8000
The AirCal 8000 is an integrated calibration system whereby the gas cylinders and calibration system
are installed inside the AQM 65 and permanently left in place. The AirCal 8000 can be scheduled to
deliver calibration gas automatically or can be manually triggered remotely using Aeroqual Cloud
without the need for a calibration engineer to visit the AQM 65.
Figure 5-5 left shows two gas cylinders (Calgaz) in the cylinder housing on the outside gas enclosure
of the AQM 65. Figure 5-5 right, shows the calibration module which sits inside the AQM 65
enclosure.
AirCal 8000 comes with two Aeroqual regulators (
AIC GASREG01
) and all of the tubing and fittings
required.
The AirCal8000 does not include calibration gases, these must be purchased locally.
Figure 5-5 The AirCal 8000 stores calibration cylinders in a compartment on the left side. All of the
components required to perform the calibration are in a module inside the AQM 65.