Dedusting unit ecomax 100
V02.00 Page 33 of 40
Chapter 7 Maintenance and
Disconnect the mains plug and secure it against reconnection.
Remove the filters as described in chapter 7.1.
Carry out the hygiene cleaning of the interior according to VDI 6022.
Use a brush, a cloth or a damp sponge for the inside of the filter unit and the
mounting frame.
Loosen the protective grille in front of the fan.
Check the inside of the fan blades for dirt and scaling and clean them if necessary.
NOTE
Water must not get into the fan or the control electronics! Do not use
pointy objects! Do not spray the unit with compressed air, water or
steam!
Document the results.
Re-attach the protective grille.
Screw the protective grille on tightly.
Insert the filters as described in chapter 7.1.
Check whether the fan can blow out freely and the filter suction plate can suck in
freely without resistance.
7.5
Filter change blow-out damper
The blow-out damper must be replaced once a year, depending on the degree of
soiling.
Operations
1
Switch off the
dedusting device.
Loosen the four filter
covers using 6 screws (see
arrows)
Fig. 15 Loosening the cover