2
※
Technical Data
Square drive………………………………………………………………………………………………..1/2”
Capacity Bolt Size …………………………………………………………………………..…...5/8” (16mm)
Free speed………………………………………………………………………………………….…7,500rpm
Max torque………………………………………………………………………………..…..450ft/lb(610N.m)
Avg.air consumption………………………………………………………………………....6.5cfm(184 l/min)
Operating pressure………………………………………………………………………….……...90psi(6.3bar)
Air inlet size…………………………………………………………………………………………...…….1/4”
Air hose………………………………………………………………………………………………….3/8” ID
Weight…………………………………………………………………………………………...4.64Lbs(2.1kgs)
A weighted sound pressure level…………………………………………………………84.4dB(A), k=3dB(A)
Sound power level……………………………………………………………………… 95.4dB(A) , k=3dB(A)
Max L
Pc………………………………………………………………………………………………………………………………….………………..
106.9dB
Vibration in the handle…………………………………………………………….…….…8.47m/s
2
,k=1.33m/s
2
※
Important Safety Rules
1.
Follow all workshop safety rules, regulations, and conditions when using wrench.
2.
Do not wear watches, rings bracelets or loose clothing when using air tools.
3.
WARNING!
Disconnect from air supply before changing accessories or servicing.
4.
Maintain the wrench in good condition and replace any damaged or worn parts. Use genuine parts only.
Non-authorised parts may be dangerous.
5.
WARNING!
Check correct air pressure is maintained and not exceeded. We recommend 90psi.
6.
Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each use and ensure that all
connections are secure.
7.
Only use impact sockets which are specifically designed for use with an impact wrench.
8.
Wear approved safety eye/face shield, ear defenders, and hand protection.
9.
WARNING!
Due to the possible presence of asbestos dust from brake linings, when working around vehicle
brake systems we recommend you wear suitable respiratory protection.
10.
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
11.
Keep children and non essential persons away from the working area.
12.
DO NOT use the wrench for a task it is not designed to perform.
13.
DO NOT
use wrench if damaged or thought to be faulty.
14.
DO NOT use wrench unless you have been instructed in its use by a qualified person.
15.
DO NOT carry the wrench by the air hose at yourself or others.
16.
DO NOT direct air from the air hose at yourself or others.
17.
When not in use disconnect from air supply and store in a safe, dry, childproof location.
General safety rules
For multiple hazards, read and understand the safety instructions before installing, operating, repairing, maintaining,
changing accessories on, or working near the assembly power tool for threaded fasteners.
Failure to do so can result in serious bodily injury.
Only qualified and trained operators should install, adjust or use the assembly power tool for threaded fasteners.
Do not modify this assembly power tool for threaded fasteners. Modifications can reduce the effectiveness of safety
measures and increase the risks to the operator.
Do not discard the safety instructions; give them to the operator.
Do not use the assembly power tool for threaded fasteners if it has been damaged.
Tools shall be inspected periodically to verify that the ratings and markings required by this part of ISO 11148 are
legibly marked on the tool. The employer/user shall contact the manufacturer to obtain replacement marking labels
when necessary.
