AeroPilates 55-5102A, Owner'S Manual

Page: 8 / 26

ASSEMBLY INSTRUCTIONS
8
STEP 1:
Remove your AeroPilates® Pro Reformer 5102 from its packaging, placing the product on
its side with the LOCKING PIN(28) side upward. Remove the LOCKING PIN(28) and unfold the MAIN
FRAME ASSEMBLY separating the half that has the attached LOCKING PIN(28). When completed, the
frame should form a
"V"
with the frame ends separated approximately three feet.
STEP 2:
Attach the four RUBBER FEET(31) to the FRONT FRAME(1) and REAR FRAME(2) with
ROUND HEAD SCREWS(M5x0.8x35mm)(38). The ROUND HEAD SCREWS(M5x0.8x35mm)
(38)
are already in the
RUBBER FEET(31).
Attach the
WHEELS(27)
to the
FRONT FRAME(1)
with
WASHERS(M8)(47) and NYLOCK NUTS(M8x1.25)(42).
STEP 3:
Unfold your AeroPilates® Pro Reformer 5102 to a flat position by moving the FRONT
FRAME(1)
away from the platform end of the
REAR FRAME(2)
in a clockwise position until fully
extended. Lower the AeroPilates® Pro Reformer 5102 so all four RUBBER FEET(31) are flat on the
floor.
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Customer Care section and order the part
needed, e-mail us at customer.care@staminaproducts.com, or call us toll free at 1-800-375-7520
(in the U.S.). Our Customer Care Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
Some product parts are fit tested at the factory to ensure proper fit and alignment. Marks in
the paint may be noticeable, but are not an indication of damage.