7
Connections
Rear Panel Connections
All two sets of Single-Ended inputs, one set of USB DAC and one set of mm
Phono input are clearly marked to indicate use.
4-Loudspeaker output binding posts (+) and (-), L & R, for 4-8 ohm speaker con-
nection
1 — Power line cord inlet
1 — Power line fuseholder
It is important sonically that your entire system be connected so that the audio
signal arriving at the speakers has correct, or “absolute” polarity (i.e., non-
inverted). Connect the black or “-” speaker terminal to the wire that connects to
the “black (-)” terminal on the A-165. Connect the red or “+” speaker terminal to
the wire that connects to the “red(+)” terminal on the A-165, and tighten the
speaker terminals securely to ensure best sonic results.
Wireless Antenna:
Connect the specified wireless antenna provided by Aeron.
About Cables:
Use the best available speaker wires and interconnects. Aeron cannot emphasize
this enough. As better components and systems are developed, it becomes in-
creasingly important to avoid the limitations of inferior system interconnections.
Connect the A-165 input the source components only the highest grade of audio
interconnect cables. To avoid sonic degradation use the shortest practical
length of cables.