Aerohive AP245X Hardware User Guide
Read about and view specifications for the AP245X in this topic. Install the AP245X using this topic.
The AerohiveAP245X external-antenna AP features 802,11ac Wave 2 dual radio, 3x3:3
MU-MIMO
with
data rates up to 1.3 Gbps per radio using existing 802.3af PoE infrastructure. Software-defined radio
allows IT
managers to enable 802.11ac performance on both radios for the best coverage and
capacity Wi-Fi and investment protection. Built-in
BLE
provides proximity, indoor location tracking, and
other location-based mobile engagement services. The AP245X has the power to support enterprise-
grade features, including built-in application visibility and control, RADIUS authentication, DHCP, captive
web portals, location services and spectrum analysis.
For more information about Aerohive APs in general, see
"Introduction to Aerohive APs"
Important! Changing the Country Code
If your access point is configured for the World Regulatory Domain, it is important to set the country
code to the country in which the AP
will be deployed to meet regulatory requirements and for optimal
wireless operation. To do this, follow these steps:
For Devices Running HiveManager:
1. Power on the AP
and allow it to find and connect to HiveManager. Once the AP
is
connected, it
appears in the table of unconfigured devices on the
Monitor > Devices
page and is categorized as
New under the Management Status table header.
2. Select the check box for the AP, and then choose
Update > Advanced >
Update Country
.
3. On the
Update Country Code
page, choose the appropriate country code from the drop-down
list, and then click
Upload
.
Page 1 of 17
AP245X Hardware User Guide
6/14/2016
