RN200 Mono Software User Manual
42
3.5.4.2 Test Process
After setting all the parameters correctly, click the "Start" button to execute the test. All test
data will be displayed in real time in the 2D graph during the test, as shown in Figure 38.
Figure 38: Network Test
The configurations of Trace and Marker in the Network test are the same as those in the
Spectrum test. For detailed instructions please refer to Spectrum test.
The network test has two modes: Single and Continuous. In “Continuous” mode, the test will
not stop, and the test result will be auto refreshed. In “Single” mode, the test will be
executed once. After the test is finished, the user can click the “Single” button to trigger
another round of tests.
During the test, the user can modify the parameter at any time in order to view the test data
and obtain the correct results.
