RN200 Mono Software User Manual
39
3.5.3.3 Trace Settings
Click the "Trace" button under the “Parameter” menu, to show the trace setting window, as
shown in Figure 36.
Figure 36: Trace Setting
A maximum of 10 traces can be simultaneously displayed in one window. Each trace can
have different configurations and represent a different test result.
There are 5 display modes: Clear White, Max Hold, Min Hold, Average, and Memory;
•
Clear White: display current test value in real-time
•
Max Hold: display the maximum tested value at specific frequency point
•
Min Hold: display the minimum tested value at specific frequency point
•
Average: display the average tested value at specific frequency point. In this mode,
the “count” parameter will be valid, which define the total number of tests for the
average
•
Memory: display the whole result curve of current test
